2878847 Truck Engine Parts Fuel Filter for Scania

Cross Reference :2878847, 2879243, 2779190, FK11007, E826KPD724-2, PU10034/2X

This is a fuel filter built to fit Scania heavy-duty trucks, replacing OEM parts 2878847, 2879243, 2779190, FK11007, E826KPD724-2, and PU10034/2X. Two sizes available: Φ85×Φ37×250 mm and Φ95×Φ43×234 mm. Pleated filter media, good flow rate, straightforward swap — no cutting corners on fitment.

Style: Fuel Filter
Thread Size: /
Outer Diameter Top: 85
Length: 250
Replaces OEM Part Number: 2879243
Brand: GREEN-FILTER
Service: OEM

Features

What This Filter Does

Fuel going into a diesel injection system needs to be clean. Even small amounts of rust, dirt, or water can wear down injector tips faster than you’d expect, especially on high-pressure common rail systems that Scania runs. This filter sits between the tank and the injection system and handles that job — trapping particles and separating water before they cause problems downstream.

Available Sizes

Two variants are available depending on your specific Scania model:

Φ85 × Φ37 × 250 mm
Φ95 × Φ43 × 234 mm

Check your existing filter dimensions or cross-reference with the part numbers listed below before ordering.

Cross Reference Numbers

Part Number	Type
2878847	Scania OEM
2879243	Scania OEM
2779190	Scania OEM
FK11007	Cross Reference
E826KPD724-2	Cross Reference
PU10034/2X	Cross Reference

Construction

The filter uses pleated filter paper with a large folded surface area — this keeps flow resistance low even as the filter loads up with contaminants over time. End caps are solid and the housing seats firmly. Nothing fancy, but it holds up to normal diesel engine operating conditions without issue.

Fitment

Direct replacement for Scania trucks. No adapters, no bracket modifications — pull the old one out, put this one in. If you’re unsure about compatibility, compare the OD, ID, and height with your current filter, or check against the cross reference list above.

A Few Notes on Installation

Prime the filter with clean diesel before fitting it. If you run it dry on startup, you risk a delayed fuel prime which on some Scania systems can trigger a fault code. Also torque the housing to spec — overtightening the filter bowl is a common mistake that causes cracking over time.

Replace interval is typically every 20,000–30,000 km, but check your service manual. If you’re running biodiesel blends or operating in dusty environments, shorter intervals are worth considering.

Specifications

Item	Details
Product Type	Fuel Filter
Size Option 1	Φ85 × Φ37 × 250 mm
Size Option 2	Φ95 × Φ43 × 234 mm
Filtration Type	High-Flow Pleated Media
Application	Scania Heavy-Duty Trucks

Get a Touch

SEND YOUR MESSAGE

Name

Company

Phone

Message

2878847 Truck Engine Parts Fuel Filter for Scania